Crack nucleation in saturated porous media     

Luc Dormieux  Eric Lemarchand  Thomas Carlioz  Laurent Jeannin 《国际地质力学数值与分析法杂志》2020,44(5):553-574

Crack nucleation has been the subject of important contributions in the last two last decades. However, it seems that few attention has been granted to the case of saturated porous media. This is the question addressed in the present paper which is devoted to nucleation in traction mode. From a physical point of view, nucleation is a sudden phenomenon, so that the material response is both adiabatic and undrained. In the spirit of the variational approach, the nucleated crack is viewed as the final state of a region of space in which the material undergoes a full damage process. In traction mode, the opening of a saturated crack in undrained condition induces a drop of fluid pressure. In case of low fluid compressibility, the presence of the fluid delays the brittle failure usually associated with nucleation, as long as the fluid pressure remains above the saturation vapor pressure. Nucleation is therefore possible only if a partial vaporization of the fluid takes place.  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献   

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials          下载免费PDF全文

Cássio B. Aguiar  Samir Maghous 《国际地质力学数值与分析法杂志》2018,42(16):2018-2046

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.  相似文献   

Complete nuclear ribosomal DNA sequence analyses of the black-footed abalone Haliotis iris     

Zhansheng Guo  Leng Han 《新西兰海洋与淡水研究杂志》2018,52(2):232-246

The black-footed abalone Haliotis iris is an economically important shellfish species in New Zealand. We successfully amplified, sequenced and analysed the complete nuclear ribosomal DNA (nrDNA) of H. iris. The length of the nrDNA was determined to be around 9.6?kb and included, in order, small subunit ribosomal RNA (nrSSU, 1858bp), internal transcribed spacer (ITS, 749?bp), large subunit ribosomal RNA (nrLSU, 3412bp) and an intergenic spacer (IGS, 3560–3662?bp). The nrLSU genes were identical in two individuals, whereas the nrSSU and ITS regions existed at three and four base differences, respectively. The IGS was more variable than the other nrDNA regions. A phylogenetic tree was constructed based on the ITS sequence datasets, which revealed that Haliotidae has two major subclades, mainly distributed in the North Pacific, Europe and Australia. The complete nrDNA sequence will be useful for the classification, phylogeny and breeding of this shellfish.  相似文献   

深水铺管船托管架疲劳分析及动态监测点选取研究     

闫宏生  王哲  王晓波  陈永訢  孟祥伟 《海洋工程》2018,36(1):107-113

作为S型铺管作业的关键性装备,托管架长期承受着交变载荷的作用,随着海洋开发向超深水发展,结构疲劳破坏问题不容忽视。采用疲劳谱分析的方法并结合线性累积损伤理论,对托管架结构频域下的变形进行了分析,计算了正常海况下和极端海况下托管架疲劳损伤度并对疲劳寿命进行了评估。研究发现托管架在正常海况下作业符合安全要求,在极端海况下局部结构会受到破坏。并从托管架结构安全监测角度,筛选了结构疲劳分析关键点位,为监测点位的选取提供了依据。  相似文献   

Feeding intensity and molecular prey identification of the mantis shrimp,Oratosquilla oratoria (De Haan, 1844), in the Tianjin coastal zone of Bohai Bay     

Qi-Kang Bo  Yun-Zhao Lu  Hui-Jing Mi  Yan-Guang Yu  De-Xian Gu  Hong-Zheng You  Shuang Hao 《Marine Ecology》2020,41(4):e12594

Bohai Bay, a representative semi-enclosed bay of China, has been severely impacted in recent decades by rapid human development. Although the mantis shrimp Oratosquilla oratoria plays an important role in the Bohai Bay ecosystem and fishery, its feeding ecology and the impact of habitat changes on its feeding habits are poorly known. In this study, we sought to identify its feeding strategy through the separation of stomach contents, and to describe its trophic ecology during maturation in the Tianjin coastal zone of Bohai Bay by the DNA barcoding method using a fragment (about 690 bp) of the mitochondrial cytochrome oxidase I (CO I) gene. A total of 594 specimens were collected from March to July 2018, and 347 (58.42%) stomachs were found to have food remains. More than half of the O. oratoria individuals had poor feeding activity, and the degree of feeding of females was higher than that of males, but there was no significant difference in the visual fullness index and the fullness weight index (FWI) between sexes for each month. In addition, the feeding activity of O. oratoria was consistent across the months, suggesting in artificial breeding programs it is not worried too much about the accessional diet supplied to the female bloodstocks except maintaining their normal food. A total of 167 retrieved prey items yielded 187 readable sequences; 86.63% of these sequences could be assigned to the species level. Consequently, 25 different prey taxa covering all readable sequences were identified, showing O. oratoria is a generalist predator. In terms of percent composition by frequency of occurrences (%N), crustaceans and fishes accounted for the same and highest percentage (35.83%) in the mantis shrimp diet, followed by mollusks (24.59%) and the remaining marine organisms (3.73%) including Polychaeta (2.67%), Sagittoidea (0.53%), and Chromadorea (0.53%). The result shows the benthic fish Oxudercidae (family) appears to be an especially important food supply for O. oratoria during maturation. The degree of cannibalism decreased with an increase in diet species and the frequencies of cannibalism in this study was noticeably higher than that in previous studies, suggesting that cannibalism may be a significant feeding strategy in the mantis shrimp O. oratoria in the Tianjin coastal zone of Bohai Bay, and because of the frequently cannibalistic behavior, the high stocking density of broodstocks should be avoided.  相似文献   

Morphological and molecular evidence supports the first occurrence of two fishes,Siganus sutor(Valenciennes, 1835)and Seriolina nigrofasciata(Rüppell, 1829)(Actinopterygii:Perciformes), from marine waters of Odisha coast,Bay of Bengal,India     

Barik Tapan K.  Swain Surya N.  Sahu Bijayalaxmi  Tripathy Bibarani  Acharya Usha R. 《海洋学报(英文版)》2020,39(6):26-35

Marine ecosystems provide a wide variety of diverse habitats that frequently promote migration and ecological adaptation. The extent to which the geographic distribution of marine organism has reshaped by human activities remains underappreciated. The limitations intrinsic to morphology-based identification systems have engendered an urgent need for reliable genetic methods that enable the unequivocal recognition of fish species,particularly those that are prone to overexploitation and/or market substitution. In the present study, however, an attempt has been taken to identify two locally adapted fish species, Siganus sutor(Valenciennes, 1835) and Seriolina nigrofasciata(Rüppell, 1829) of order Perciformes, which happens to be the first record in Odisha coast,Bay of Bengal. The diagnostic characteristics of Siganus sutor are: dorsal fin XIII-10, anal fin VII-9, pectoral fin 15,pelvic fin II-3, while that of Seriolina nigrofasciata dorsal fin VI-I-35, anal fin I-17, pectoral fin 16, pelvic fin 5. All COI barcodes generated in this study were matched with reference sequences of expected species, according to morphological identification. Bayesian and likelihood phylogenetic trees were drawn based on DNA barcodes and all the specimens clustered in agreement with their taxonomic classification at the species level. The phylogeographic studies based on haplotype network and migration rates suggest that both the species were not panmitic and the high-frequency population distribution indicates successful migration. The result of this study provides an important validation of the use of DNA barcode sequences for monitoring species diversity and changes within a complex marine ecosystem.  相似文献   

溢油对海洋生态系统内在价值损害的评估——以“塔斯曼海”轮溢油事故为例     

严志宇  孙冰  付红蕊  任杰 《海洋科学》2020,44(4):85-89

作者籍以能值和生态炯分析,将海洋生态内在价值补充到溢油损害评估中,并以"塔斯曼海"轮溢油事故为例,分析了生态系统内在价值损害评估的特点。结果表明溢油生态内在价值损害大于对生态服务价值的损害,前者是后者的6.9倍;能值变化反映对资本积累的损害,生态炯更突出了溢油对初级生产力的生态系统的影响。本评价是现有溢油损害评价的补充,可为彻底、有效环境治理、生态修复提供保障,对海洋开发管理决策和公众环保意识的提高将有积极的影响。  相似文献   

后挖沟深度对深海海底管道屈曲影响数值分析     

李修波  刘可安  王华昆  王鸿飞 《海洋工程》2020,38(3):152-160

鉴于海底管道的服役水深越来越深,主要采用犁式挖沟机对预铺设于海床之上的海底管道采取后挖沟的方式将海底管道埋设于海床之下,以保护其免受不必要的损伤。针对后挖沟深度H是海底挖沟机的重要设计参数,也是影响管道悬跨的重要因素的问题,对SMD(UK)犁式挖沟机展开参数优化,确保作业过程中悬跨段管道在外部静水压力作用下,海底管道不会发生屈曲破坏。采用ABAQUS软件,分别建立了作业前和作业中两种工况下的悬跨模型,分析机械手对接触部分管道的损伤,结果显示,作业中的机械手对悬跨管道的损伤更大;同时,建立了作业中不同管径下,后挖沟深度对管道损伤的安全裕量关系曲线。进一步,结合作业中不同挖沟深度下的管跨段屈曲数值模型,对处于外部静水压力作用下的悬跨管的屈曲失效展开分析,结果显示,随着后挖沟深度的加大,不同管径下的悬跨段管道局部出现塑性压溃的临界压力值不断降低;管道外径的增大,降低了同一后挖沟深度下发生屈曲失效的压力值。最后,在后挖沟深度与外部静水压力组成的区域内,建立屈曲失效临界关系曲线,并划分出工作区和压溃区,为深海管道后挖沟埋管的施工提供工程参考。  相似文献